Horrors found

A selection of items that failed their inspction and tests with an explaination of why.

Run over flex

Here is another section of cord. As you can see the insulators through the holes in the outer sheath they are no longer protected. The outer sheath has done it’s job but it’s now only suitable for recycling. We cut … Continue reading

Posted in Horrors | Comments Off on Run over flex

Worn strain relief

This was powering a HiFi in a warehouse. As we say to our clients, and to you, the vast majority of the faults we pick up we do during the inspection which is done by eye. You too have eyes … Continue reading

Posted in Horrors | Comments Off on Worn strain relief

Tell tale heat damage

Here’s another plugtop. When it was plugged into a socket it looked fine but as soon as we unplugged it there was a tell tale discolouring around the neutral contact.         Once inside the plugtop you can … Continue reading

Posted in Horrors | Comments Off on Tell tale heat damage

Hidden heat damage

Here’s a plugtop that looked fine from the outside. One of our inspections is to take to back off the plugtop to check inside and to verify the size of fuse fitted.         Inside the same plugtop. … Continue reading

Posted in Horrors | Comments Off on Hidden heat damage

Cracked plug

Here’s a plugtop that has a piece of the scasing cracked off. It’s possible to see inside the plug to the terminals, which would be live when in a socket. There’s no basic protection if you can get to the … Continue reading

Posted in Horrors | Comments Off on Cracked plug